PVC formwork Panel ,PVC formwork Panel for construcion Industry

Boardway™ PVC formwork panel

lightweight & strong boards - PVC formwork panel

PRODUCT AVAILABLE

Thickness:

10mm,12mm, 13mm, 14mm, 15mm, 17mm, 18mm

Width:

915,1220 standard. Other width can be customized.

Size:

3'*6', 4'*8' 915*1830,1220*2440 standard. Other size can be customized.

Colour:

Grey green

Surface:

Smooth

Density:

0.68-0.8g/cm3

MAIN FEATURES

Boardway™ PVC formwork panel are excellent alternative
to formwork Plywood

Our domestic projects

Our Thailand projects

Our Vietnam projects

What makes PVC Formwork Panel so popular nowadays? Why is it better than plywood?

Comparison	PVC Formwork Panel	Plywood Formwork Sheet
Recycled	≥20	≤8
Construction technology	can be sawed, nailed, drill, can be processed as plywood	has been popularized
Demould	Not need mould release agent, Convenient demoulding	Need mould release agent, also need to clear the surface
Connection	Tight assembling, Structured, surface smooth,which can meet the standard of as-cast-finish concrete	Easy to have warping deformation after 4 times recycle, bad thickness tolerence,which makes the deviation of building structure, Easy degumming , bubble, Crack;Difficult to handle when reassembled
Weather resistance	From minus 10 to up to 70, no shrinkage no deformation, Non expansive cracking	All kinds of weather
Water resistance	Water-proof	Not Water-proof, Easy to have warping deformation
Fire resistance	Self extinguishing	inflammable
Plasticity	Good plasticity, can be used for various type of construction part, such as cylinder, arc	No plasticity
Customization	Can customize according to project, which improves the efficiency	Not customizable, have to do fabrication on site, waste time and labor
Cutting ability	very good cutting ability, the edge is smooth after cutting	Bad cutting ability, have to use special saw
Environmental effect	Recyclable	Non-Recyclable

More

FAQS

Q: What is the normal density using for the formwork sheet?

A: Here is some reference: 10mm 0.7g/cm3, 12mm: 0.68-0.75g/cm3, 15mm: 0.68-0.75g/cm3 ; 18mm: 0.7g/cm3.

Q: How is the main mateiral for this product?

A: PVC resin.

Q: Why this material is so expensive comparing with plywood?

A:Only compare the unit price, yes PVC formwork is expensive than plywood; but if you compare the total cost with and project quality, WPC formwork have more benefits, let's see an example.

Benefit: Actual cost saving

18mm both sides flimed plywood, unit price: $20, can use about 7-8 times, the price average is $2.5-2.85 each time
18mm PVC formwork sheet, unit price: $40, can use about 30-35 times, the price average is $1.33-1.1 each time

Q How many times can PVC formwork sheet recycle?

A: Depend on how you use it, if you fit the board on a structure and use it for a while, the max so far from one of our Thai customer;sproject is 52 times each side; if you cut it and use it as a strip following with the right instruction, each side can be recycle around 20 times.

More

Further infomration on Building Board